In continuation to the introduction blog on NetScaler MPX Command Center (/ blogs / 2012/06/27 / NetScaler- command center simplifies -mpx-and-ladders-roll-of-citrix-solutions /) by John Gudmundson, this blog will unveil the command of basic ingredients NetScaler MPX complete Solution center.
NetScaler Command Center has provided Orchestration Central on a software solution to date. We have now taken the external dependencies and aggregate those in "The solution in a box." In this solution, Command Center runs on CentOS 5.5 64-bit operating system with MySQL 1.5.48, the 32-bit database. All it goes on a XenServer VM. to strengthen the power of this configuration, it supports 500 GB hard drive with 20 GB as partition software and 480 GB as database partition.
this package the whole solution provides uninterrupted management of a high-availability configuration. It keeps in sync database with MySQL database replication in both directions by an automated channel. with the help of this configuration also automated installation provisions for storing DB backup and recovery at the time of need. You just need to specify the path and the rest is automated.
Command Center stores a lot of information on transactions regular. NetScaler MPX Command Center has built-in automatic monitoring of disk space. It generates an SNMP trap discs currently uses of outer space over 0%. This level of use can be adjusted by the user at any desired percentage.
Now, having read this information, the question is, how easy it is to get on board MPX Command Center? Once Command Center MPX is rack mounted, you can perform the initial configuration using the serial console or direct Ethernet cable. Once completed, you will just need to connect with the default credentials, run the Command Center configuration script "ccnetworkconfig.sh". This script requests information on the IP address of the Command Center, XenServer and others as well as details of the NTP server. Once the system restarts, you will have your appliance.
This is a high-availability configuration, the configuration similar level must be performed on secondary node Command Center. After both nodes are functional, you will just need to run a script on the primary node to initiate a high-availability configuration. How can it get easier !! 
Command Center MPX has no database and external dependency licenses. It does not need additional hardware to deploy. It reduces overall maintenance costs on equipment and software. It increases scalability and provides a smart and secure solution being single box and contained. It highlights a complete solution in a box!
0 Komentar